TVI-DVR216 HD-TVI 16 Channel H.264 1080P@30FPS Real-Time DVR

SKU: TVI-DVR216
 
Model TVI-DVR204 TVI-DVR208 TVI-DVR216
Intelligent Video Inputs Analog EZHD/SD Inputs 4 8 16
HD Video Resolutions EZHD / HD-TVI 720p30(25), 720p60(50), 1080p30(25)
Analog CVBS Video Input Up to 960x480,720x480(NTSC); 960x576,720x576(PAL)
Adaptive Ports Input Format Auto Detection, EZHD/SD can be mixed in any combination, at any time
Interface BNC Connector; 1V p-p, 75Ω
Privacy masking 4 areas programmable in OSD menu
Additional OMNI-IP PNP Channels (up to 2 MP) 2
Total Cameras Supported 6 10 18
Video Output Main HDMI & VGA Full HD 1920×1080/60Hz; SXGA: 1280×1024/60Hz; 720P: 1280×720/60Hz; XGA: 1024×768/60Hz
CVBS Analog BNC NTSC 704x480 / PAL 704x576; 1V p-p, 75Ω
Display Modes 1, 2x2, 1+5, 1+7, 3x3, 4x4 split; User Defined Sequence / Alarm Pop-up HDMI/VGA and/or CVBS may be configured as main or call/event monitor
Recording Video Compression Dual Stream: H.264 for Main Stream and Sub-stream
Video Bitrate 32Kb/s~10Mb/s each channel
Encoding Main Stream 1080p; 720p; WD1; 4CIF; VGA; CIF
Sub Stream WD1, 4CIF; CIF; QVGA; QCIF
Frame Rate Main Stream 1/16 fps ~ Real time frame rate
Sub Stream 1/16 fps ~ Real time frame rate
Quality 6 levels: Lowest/Lower/Low/Medium/Higher/Highest
Mode Continuous; Motion; Alarm; Motion or alarm, Motion + Alarm
Motion Detection Configurable per camera for area(s), sensitivity and arming schedule programmable by day of week and hour of day
Schedule Period Per day in 1 hour blocks; or 8 time periods per day, each with different record mode; plus holidays
Pre- and Post- Event Recording Pre-record 0~30 seconds; post record 5s~10 minutes
Playback Synchronous Playback 4 channels 8 channels 16 channels
Playback Resolution 1080p, 720p, WD1, 4CIF, VGA, CIF, QVGA, QCIF
Search Type Time/Date; motion or log event; Manual Tags; Smart Search for motion events from recorded video
Capacity Up to record rate
Playback Controls Play; Pause; Forward/Reverse; speed control for single~1.8~16X; jog/shuttle Slide bar with overview of record type and snapshot display from slider position
Digital Zoom During Playback Supported on Local Displays and CMS
Event & Alarm Event Source MD (Motion Detection), Video Loss, Video Tampering/Exceptions
Event Action Schedule Per day in 1 hour blocks; or 8 time periods per day, each with different record mode; plus holidays
Event Action Buzzer, E-mail, Alarm Full Screen Pop-up, Notify CMS Client, trigger alarm output
MD Area User selectable grid pattern 22x15 areas with adjustable per camera sensitivity
 
System Alarm Alarm Source HDD Error, HDD Full, LAN Fail/Address Conflict, Illegal login, Video Signal Exception/, Record/Capture exception
Alarm Action Buzzer, E-mail, Notify CMS Client (network permitting), trigger alarm output
  Two-way audio Audio input pass through to remote web or CMS client; remote audio from web or CMS client pass through to audio output
Audio Input 4 Inputs for record, 1 input for two way audio; RCA, 2V p-p, 1KΩ
Output 2 Outputs; RCA, 2V p-p, 1KΩ
Compression Up to 64Kbps, G.711u
Network Interface 1Gb/s 1000 Base-T Ethernet RJ-45
Addressing Static IP, DHCP, xDSL support
NTP/DST Supported; choice of time zone, NTP server, DST start/end/offset
Protocols Supported TCP/IP, PPPoE, DHCP, DNS, DDNS, NTP, SMTP, SNMP, NFS, iSCSI, UPnP™, HTTPS, KT&C Plug-and-Play (for connected IP Cameras), OMNI Utility Device Discovery
NAT uPnP router NAT/port mapping forwards ports automatically (*Router must support/permit uPnP function)
Users Up to 128 simultaneous connected users
DDNS Simple DDNS free service tracks WAN IP address and HTTP port
Security User IDs “Admin”, plus multiple configurable login IDs
User Levels All rights for “admin”; Per camera per user rights assignment for Operator and User levels
User Privilege Control Local and remote access to Live views, audio, recording, playback, menus, PTZ, alarms, copy, logs, upgrade, reboot
Storage & Clip copy HDD Storage 4 SATA HDD up to 4Tb each
eSATA One, on rear panel
NAS/SAN up to 8 network disks (8 NAS disks, or 7 NAS disks +1 IP SAN disk)
Copy Type Multi-Channel or Single Channel File
Copy Device USB 2.0 Drive (2 ports)
S.M.A.R.T. Temperature, duration, error rates, bad sector detection, and more
  USB 2.0 Ports Two front, one rear for mouse and data I/O
Serial & I/O Serial Port 1 RS-232C (future use)
RS-485 One; selectable speed and bit pattern; multiple protocols (Pelco P, Pelco D, others)
Inputs 16 alarm inputs
Outputs 4 alarm outputs
Keyboard Input for external control keyboard
Up the Cable Control Multiple protocols, can be sent out of any BNC port to compatible cameras
User Controls Local Controls Front Panel camera, function and navigation buttons; IR Remote; Mouse
Software Web Viewer Live view, playback and configuration via IE, Chrome, Firefox, Safari (with free plug-in/extension installed)
User Rights Control Per user-per camera for multiple functions
Mobile Viewer iOS and Android supported ; live 1 & 4 camera views; single camera playback; snapshots from live or play; copy clips/record to smartphone; audio support; PTZ control. HD version of app, optimized for tablets, displays up to 16 live view cameras
CMS Free PC and MAC Clients support multiple device viewing, playback (with digital zoom) and configuration; user rights per camera; E-map support; live view up to 64 cameras in 4:3 and 48 cameras in 16:9; up to 16 cameras in playback
Event Logging Multiple types: alarm, exception, operation, information; dozens of sub-types within each major type
Firmware Upgrade From USB or remotely
Backup/Restore Configuration From USB or remotely
  Dimension (W x H x D) 17.5” x 15.3” x 2.7” | 445 × 390 × 70mm
General Chassis Type 19” rack-mountable 1.5U chassis
Weight without HDDs 11 lb. / 5Kg
Operating Temp 14°F~131°F (-10°C~55°C)
Operating Humidity 10% ~ 90%
Voltage 100~240 VAC 47~63Hz
Power Up to 30W Up to 40W Up to 55W
Certifications FCC, CE, RoHS

NOT COMPATIBLEWITH IPV6

© 2017