Video Adapters

INCLUDES: On Screen Display Resolution up to 640x480 Compatibility with CRT and LCD monitors

Features Menu: Specilly designed for computer CRT monitor or LCD color monitor. Multi Signal inputs: VGA, Composite Video, S-Video. Supports NTSC...

Specifications: Video Input Channel: 1, Video Output Channel 2 Video Input Level: 0.8~1.2Vp-p, 75 Ohms Video Output Level: 1Vp-p (Standard), 75...

With this powered video 4-way splitter, you can take a BNC connection and send one video input to four separate sources, without loosing the strength...

Designed for long range VGA distribution over cost effective CAT5 UTP cable. One or multi video input to multi output, with one VGA loop output (VGA...

The CVE111VGA allows VGA video signals to be transmitted up to 443 feet via 4-paired CAT5 STP or UTP cable. Used in pairs, the VGA extender is used...

The GL01 video ground loop isolator is a passive device which reduces ground loop interference with CCTV signals and can be easily installed in a new...

IP-COAX is a low cost, easy and speedy solution to allow you use exisitng coax cable to send IP camera signals. Used in pairs with your RG59 cable,...

The RS1I-4O is a serial data distributor that gives serial data back on 4/8/16 outputs at the same time, allowing perfect configurations. The...

DB9 female connector for RS232 to 2 wires terminal block for RS485 Two wire, differential signals, half duplex Non power operation Auto switching...

Looking for a passive transceiver hub for your 16 camera setup? We have just the thing! Our passive transceiver hub requires no power and has 16 BNC...

Twisted pair video transceiver for CCTV - allows Video and Power to be transmitted up to 1000 feet through 1 CAT-5 Cable. BNC male and 6 pin terminal...

Protects equipment from high voltage surges such as lighting strikes. UL grounding requirements for coaxial cable offers protection from hazardous...

Transmit a full motion monochrome video signal up to 1,900 feet, color video signal up to 1,300 feet 4 Video Inputs Passive, no power required ...

Using only one pair of wires from a UTP network cable. Install one balun to the camera or video source and one to the VCR or monitor. Connect 2...

4 Channel Video Balun. This balun takes 4 BNC input channels and converts them into a digital signal that can be sent up to 2000 feet away.

Transmit a full motion monochrome video signal up to 1,900 feet, color video signal up to 1,300 feet 1 Video Input Passive, no power required ...

The VKM001 allows VGA video signals and a keyboard mouse to be transmitted up to 300 feet by using 2 CAT5 STP or UTP cables. Used in pairs, the...